Renovations almost always involve paintwork, and while the ceiling isn’t an obvious decorative portion, once the signs of wear start to appear, a new paint job becomes necessary. Over time, your ceiling can be stained or exposed to destructive elements such as water damages and peeling paint. A certified painting company can provide you with the necessary painting services to give your ceiling an aesthetic new look. If you’ve decided on painting or repainting your ceiling, at Infinity Painting, we have developed this blog to help you with the tools, preparation, and painting procedure. Â
Tools Required
Like every other DIY project, you need to be prepared with the right gear. You don’t have to break the bank buying expensive equipment, although there are a few items that might make your job a whole lot easier. You may need to ensure the following equipment is present before working on the preparations.
- A roller set
- Stepladder
- Sandpaper
- Good quality painting brush
- Ceiling paint
- A filler
- Stain block paint
- Filler and filling knife
- Sugar soap & sponges
- Protective tape
While ceiling paint might be more costly than normal paint due to its specialization, it comes with benefits such as being splatter-free. It’s also highly recommended for repainting ceilings. If your ceiling contains any patches from previous water leaks, good-quality stain block paint should do the trick. Furthermore, ensure you wear a mask, safety glasses, and even a baseball cap to avoid paint freckles. Apply protective tape on the wall edges connected to the ceiling to prevent lapping onto the walls.
Preparations
If you have any furniture in the room, ensure you cover them with canvas or adhesives to protect them from dust particles and paint freckles. Check the condition of your ceiling to identify any pre-existing issues that need to be dealt with. Some ceilings come covered with wallpaper, and if its condition is poor, you would have to tear down the cover.
You can use a filler such as Easi-Fill to deal with pre-existing holes since it dries fast. If your ceiling happens to be flat painted, you can use sandpaper to get rid of all the built-up dirt. Once you’re ready to start, you can use the sugar soap and water to clean away the remaining dirt.
Painting
Different methods can be used to ensure the success of this project. However, these techniques depend on the kind of paint used. Also, the material used would determine the painting technique for the best results. You can either use a roller with a long handle or the stepladder.
Cut in Before Rolling
Most of the work in this process lies in the details. Using the brush and a little paint at a time, carefully paint along the ceiling’s edge. You can work in sections moving quickly from one part to the next to ensure the paint brushed along the edges doesn’t dry up before rolling the adjoining section for a smooth and consistent coating. This technique helps the painter avoid lap marks. For textured ceilings, cutting in might seem impossible. However, you can knock off the texture at the edge using a butter knife to leave a small groove. Clean out the groove and cut in along the edge of the ceiling. To maximize the paint coverage while minimizing paint splatters, you would be wise to invest in a quality lambswool roller.
Roll Gently on Textured ceilings
Textured ceilings are a common design in many homes, and painting them can be tricky. If the surface has already been painted over, it’s safe to repaint. However, if the texture has never been painted, you could risk damaging it with the water in the paint. This all depends on the quality of the texturing project. Suppose there’s an invisible portion of the ceiling. In that case, you can test the texture by rolling some paint onto that section and observing how the texture reacts. If it loosens, then painting over that ceiling is too risky.
When painting textured ceilings, avoid going back and forth because you risk damaging the texture and pulling it off the ceiling. Instead, paint the first coat and wait for it to dry before rolling another one perpendicular to it. Once you’re done with the paint job, you can remove the protective tape.
Tips for Successful Painting
The following tips can guide you towards painting your ceiling correctly.
Always Use Two Coats of Paint
While you might save money applying just one coat onto your ceiling, it can cost you more in the long run. Depending on the color or condition of the base surface to be painted, one coat of paint is hardly ever enough. It doesn’t offer enough color coverage leaving the base color to bleed through it and altering your preference. A second coat is also durable and easier to clean as it provides a kind of sea.
Don’t Paint in a Room That’s Too Hot or Too Cold
Room temperature is the ideal painting temperature. Painting your ceiling in cold temperatures prevents the paint from curing properly since it takes a longer time to dry. Improperly cured paint is vulnerable to dirt, peeling, chipping, and bubbling. On the other hand, hot temperatures cause the paint to dry too quickly. While this might sound like a good thing, it’s a disadvantage. Hot temperatures affect the paint’s adhesion to the ceiling resulting in conditions such as peeling.
Contact Us for a free Quote
To boost your ceiling’s aesthetic appeal, painting it can work wonders. While it might seem like a fun job, it comes with various limitations, such as joint, arm, or even neck pain, especially if you’re not used to the job. If you’re looking for a certified painting service, Infinity Painting is at your service. We offer a wide range of painting services that are affordable, high-quality, and reliable. Reach out to us today for a free quote, or visit our website at https://paintersnearnewhaven.com/ for more information.
Infinity Painting
30 Taft St
Hamden Connecticut 06514
(833)724-6828
Social Media